Injectable Powder Filling Machine Model No.AEPF -120  
     
 
   Production Rate
 120 Fills/Min. for Single Dose
 60 Fills/Min. for Double Dose
 30 Fills/Min. for Triple Dose
 15 Fills/Min. for Four Dose
   
   Power Specification
 1.5 H.P, 440 Volts, 3 Phase, 4 Wire System, 50 Hz
   
   Fill Capacity
 50 mg. to 1.5 gm. in single dose with the help of extra change parts
   
  Accuracy
 

± 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (below 28% Rh)
   
  Overall Dimension
  2200mm (L) x 715 mm(W) x 1700mm (H)
Net Weight : 650 Kgs. Gross Weight : 950 Kgs.
   
   Input Specification
 Container Dia. : 25mm to 38mm
 Container Height: 36mm to 75mm max.
 Rubber Stopper : 20mm Butyl
   Utility
 Compressed Air: Max. 2 Kg /Cm2 Oil Free
 Vacuum : 25" Hg. @ 300 LPM Displacement
 Relational Humidity : Below 28%
   
 
  Optional Accessories
 Pure Air Filter
 Vacuum Pump
 Oil Free Air Compressor
 Online Pre-Media filling Arrangement
 Pre & Post Gassing Arrangement
 Aluminum Profile Cabinet covering full Machine
 
 
  Salient Features
 “No Vial - No Filling” system eliminates wastage of costly powder
 Automatic Machine stoppage during Vial toppling
 Flush Mounted Gauge & Regulator for the easy setting
 Individual drives for Scrambler & Un-scrambler to match the speed of filling and sealing
 Separate D.C Controller for Vibratory Rubber Stopper System
 All the parts coming in contact with Powder, and Rubber Stoppers are made of S.S 316L
 All Motors are provided with appropriate Contactors and Relays for the protection against any overload or Jamming
 Safety clutch system to avoid Vial breakage
 Variable Frequency Drive for speed control
 All contact parts are easily removable for Autoclaving / Sterilization
 
     
 
All rights reserved by Ambica Pharma. Developed by : www.itechnosolution.com